海志蓄電池HZY12-33產品型號簡介

海志蓄電池HZY12-33產品型號簡介

海志蓄電池主要追求產品的先進性，可靠性和環保性，采用國際內化成高新技術及生產工藝，實現了企業的環保理念。外化成和內化成區別在于：傳統蓄電池主要通過化成槽進行充電，化成后變為熟極板，然后出槽，負極板在接觸空氣和清洗時會快速氧化，很難保證電池極板質量，并產生廢水，對環境造成很大污染；內化成則采用特殊配方的生極板，裝入電池槽內密封充電，極板既不會接觸到空氣也不會氧化，正負極板充電均衡，電池一直性好，壽命長，真正實現了優化生產，綠色電池的環保理念。海志蓄電池使用無污染排放的工藝標準，減少蓄電池的極板污染，同時產品質量也大大提高。 HTC mainly pursuits the products’ advanced, reliability and environmental protection, it adopted the inner production process, the advanced high-tech in International field, to achieve the its environmental philosophy. The difference between the inner-production and outer-production is: the traditional battery mainly be charged through the production slot, then they changed into processed plate and get out of the slot. The negative plate would be rapid oxidized when exposed to air and cleaned.It is difficult to ensure the quality of battery plates. And the produced wastewater would cause great pollution to the environment.

產品特點Features 

免維護無須補液Maintenance free and without liquid added 

適應溫度廣（-15-45℃） wide range of adaptation temperature (-15-45℃) 

設計壽命長（5-8年） long design life (5-8 years) 

安全防爆 safety explosion-proof 

無游離電解液，側倒90°仍能使用 no free electrolyte and can be still useful when the side down of 90 ° 

內阻小，大電流放電性能好 Small internal resistance and good performance of high current discharge 

自放電小 Small self-discharge 

荷電出廠，使用方便 charged before they leave the factory and easy to use 

獨特配方，深放電恢復性能好 Unique formula and good performance of deep-discharge recovery 注意attention 

額定容量（1C10小時率）為在25℃下所得的平均值，可以通過10次以上的充、放循環使用； Nominal capacity (1C10-hour rate) is obtained at 25℃on average, can accept more than 10 times of charge and discharge cycle use 安裝使用 Installation and Usage 使用前，請檢查蓄電池外觀（有無漏酸，破裂）。 Before use, check battery skin (with seamless acid, rupture). 蓄電池的安裝必須由人員來進行。 The battery must be installed by professionals. 在電池連接過程中，請戴好防護手套，使用扭矩扳手等金屬工具時，請將金屬工具進行絕緣包裝以防觸電。禁止將金屬工具同時接觸到電池的正、負端子，造成電池短路。 In the course of the battery connection, wear protective gloves. When use a torque wrench and other metal tools, please insulation packaging to prevent electric shock. Prohibit access metal tools to the battery positive and negative terminals at same time. Otherwise cause the battery short circuit. 安裝搬運電池時應均勻受力，受力處應為蓄電池殼的部分，避免損傷極柱。 The battery should be uniform force when Installation and carrying the battery. Force at the shell should be part of the battery shell to avoid damage the pole. 禁止將不同品牌，不同容量的蓄電池并聯或串聯使用；電池在多只串聯使用時，請按電池標識“+”，“-”極柱依次排列，電池之間的距離不能少于15mm,且連接部位要緊固，防止產生火花或接觸不良。Prohibit hybrid application of different brands and different capacity batteries in parallel or in series. Please put the battery in order of priority identified "+","-" pole when in a a multi-series usage. The space between batteries can not be less than 15mm and the connection parts must be tightened to prevent sparks or instable contact. 安裝接插式端子的蓄電池時，請勿改變端子的形狀和位置，如特殊情況需要，請與客戶服務中心聯系。 do not change the shape and location of terminals when Installing plug-in terminal of the battery. Please contact 

customer service at special circumstances require. 和外接設備連接之前，必須使設備處于斷開狀態，并再次檢查蓄電池的連接極性是否正確，然后再將蓄電池（組）的正極連接設備的正極，海志蓄電池（組）的負極連接設備的負極端子，并緊固好連接線。 The device must be disconnected and check again the correct of battery polarity connection before connecting external devices. Then connect the positive cathode of the battery (group) to the positive cathode of devices, the negative anode to the negative cathode devices terminal, and tighten the cable.

海志蓄電池HZY12-33產品型號簡介海志蓄電池HZY12-33產品型號簡介